Dataproducts Postage Non-OEM New Postage Meter Red Ink Cartridge for Pitney Bowes 797-0/797-Q/797-M

Dataproducts Postage Non-OEM New Postage Meter Red Ink Cartridge for Pitney Bowes 797-0/797-Q/797-M

Comment acheter ces produits?

REVENDEUR

Si vous êtes un client CIG, veuillez connexion ou Inscription Devenez distributeur.

ENTREPRISE OU CLIENT

S'il vous plaît remplir ce bref formulaire pour être connecté à un revendeur.

ENTREPRISE OU CLIENT

Merci de votre inscription!!

Votre demande a été transmise à votre revendeur local de produits Clover Imaging et vous serez contacté dans les 2 jours ouvrables.

Additional Product Information

Technical Specifications

Compatible avec les imprimantes suivantes:

Pitney Bowes
  • Postage Meter "Mailstation/Mailstation2" K700
  • Postage Meter "Mailstation/Mailstation2" K7MO

Numéros OEM compatibles croisés:

  • Pitney Bowes 797-0
  • Pitney Bowes 797-0BI
  • Pitney Bowes 797-0SB
  • Pitney Bowes 797-M
  • Pitney Bowes 797-Q
  • Pitney Bowes K700
  • Pitney Bowes K780003
  • Pitney Bowes K7M0

Dimensions de boite de produit:

  • EA
  • 1.25 in
  • 5 in
  • 6.25 in
  • 0.09 lbs

Videos and Downloads

Télécharger:

Dépannage du Produit

Groupes de produits

Please follow these instructions to install your new cartridge

  • Press Menu on the front panel display
  • At “Use Ink Functions”, press Yes
  • At “Replace Ink Cartridge”, press Yes and follow the instructions for adding ink.
  • Open the top cover and locate the ink cartridge.
  • Press the top of the ink cartridge latch (on the green unlock icon)
  • Tilt the old cartridge towards you and lift out. Discard the old cartridge.
  • Remove the new cartridge from its package and pull off the protective tape.
  • Tilt the new cartridge towards you and insert into printhead. Straighten cartridge so it is upright.
  • Press down on the ink cartridge latch firmly until it locks into place.
  • Close the meter cover. Press Enter/Yes

If your machine displays an error message stating "No Ink Tank Detected", please follow these steps:

  • Open the top cover of the machine. You will see the Top Cover Open message appear.
  • Select Replace ink tank. Close the top cover to stop the process. You will see “Moving Ink Tank to Replacement Position”.
  • Open the ink cartridge guard.
  • Tilt the old cartridge towards you and lift out. Discard the old cartridge.
  • Remove the new cartridge from its package and pull off the protective tape (if applicable).
  • Tilt the new cartridge towards you and insert into printhead. Straighten cartridge so it is upright.
  • Press down on the ink cartridge latch firmly until it locks into place.
  • Close the cover. Your machine will automatically recognize the new cartridge and will return you to the Home screen shortly.
If your postage machine is producing poor impressions, you may need to run a cleaning cycle or purge.

Please keep in mind that this process may vary by machine and that you may also consult your machine’s user manual for instructions on performing a cleaning cycle.

  • Open the lid on your machine.
  • The ink cartridge will move to the front of the machine. Remove it, and set it aside.
  • Remove the printhead by squeezing the clips holding it into place.
  • Clean off the copper contact with a lint-free cloth or eraser.
  • Reinsert the printhead back into the machine, pushing it in until it clicks into place.
  • Insert the cartridge back into the machine, and close the cover. The machine will then begin to initialize.
  • Press the Options key once, followed by the Page Down key twice.

Select the Following:

  • Advanced Features
  • Maintenance Mode
  • Printer Maintenance
  • Purge
  • Purge C

Once the cleaning is finished, the display will prompt you to insert an envelope to printout a test page. The test page should appear as straight lines that are not broken or smeared in the pattern. Here is an example of a good test page vs. a bad test page:


If the test page looks good, press Enter/Yes, then press Home to go back to the main screen. If the test pattern still looks bad, repeat the instructions above up to three times. If the print quality still hasn’t improved, you may need to replace the machine’s printhead.
Please follow these instructions to install your new cartridge

  • Press Menu on the front panel display
  • At “Use Ink Functions”, press Yes
  • At “Replace Ink Cartridge”, press Yes and follow the instructions for adding ink.
  • Open the top cover and locate the ink cartridge.
  • Press the top of the ink cartridge latch (on the green unlock icon)
  • Tilt the old cartridge towards you and lift out. Discard the old cartridge.
  • Remove the new cartridge from its package and pull off the protective tape.
  • Tilt the new cartridge towards you and insert into printhead. Straighten cartridge so it is upright.
  • Press down on the ink cartridge latch firmly until it locks into place.
  • Close the meter cover. Press Enter/Yes

If your machine displays an error message stating "No Ink Tank Detected", please follow these steps:

  • Open the top cover of the machine. You will see the Top Cover Open message appear.
  • Select Replace ink tank. Close the top cover to stop the process. You will see “Moving Ink Tank to Replacement Position”.
  • Open the ink cartridge guard.
  • Tilt the old cartridge towards you and lift out. Discard the old cartridge.
  • Remove the new cartridge from its package and pull off the protective tape (if applicable).
  • Tilt the new cartridge towards you and insert into printhead. Straighten cartridge so it is upright.
  • Press down on the ink cartridge latch firmly until it locks into place.
  • Close the cover. Your machine will automatically recognize the new cartridge and will return you to the Home screen shortly.
If your postage machine is producing poor impressions, you may need to run a cleaning cycle or purge.

Please keep in mind that this process may vary by machine and that you may also consult your machine’s user manual for instructions on performing a cleaning cycle.

  • Open the lid on your machine.
  • The ink cartridge will move to the front of the machine. Remove it, and set it aside.
  • Remove the printhead by squeezing the clips holding it into place.
  • Clean off the copper contact with a lint-free cloth or eraser.
  • Reinsert the printhead back into the machine, pushing it in until it clicks into place.
  • Insert the cartridge back into the machine, and close the cover. The machine will then begin to initialize.
  • Press the Options key once, followed by the Page Down key twice.

Select the Following:

  • Advanced Features
  • Maintenance Mode
  • Printer Maintenance
  • Purge
  • Purge C

Once the cleaning is finished, the display will prompt you to insert an envelope to printout a test page. The test page should appear as straight lines that are not broken or smeared in the pattern. Here is an example of a good test page vs. a bad test page:


If the test page looks good, press Enter/Yes, then press Home to go back to the main screen. If the test pattern still looks bad, repeat the instructions above up to three times. If the print quality still hasn’t improved, you may need to replace the machine’s printhead.

* Rendement de page basé sur des impressions avec une couverture de page de 5 %.

Yield increase
Close
Yield increase

Les cartouches d’imprimante remanufacturées à rendement étendu de Clover Imaging sont conçues, élaborées et fabriquées pour offrir une qualité supérieure et une performance améliorée, tout en surpassant les rendements de pages les plus élevés du fabricant d’origine. Les cartouches à rendement étendu garantissent des rendements plus élevés et un coût par page plus bas sans sacrifier la densité ni la qualité d’impression. Les cartouches d’imprimante remanufacturées à rendement étendu de Clover Imaging sont très durables et ont été certifiées par GreenCircle comme produits en circuit fermé contenant au moins 86 % de contenu recyclé. Pour les entreprises à la recherche d’une impression de haute qualité, durable et à un prix abordable, le choix est évident.

Contenu recyclé certifié
Close
Recycled Content Certified

GreenCircle est un écolabel indépendant et tiers qui reconnaît l'engagement d'une organisation à réutiliser les matériaux pour soutenir une économie circulaire et réduire sa dépendance aux matières vierges. Les cartouches de toner remanufacturées de Clover Imaging Group sont certifiées GreenCircle pour contenir 86 % de contenu recyclé et les cartouches d'encre sont certifiées à 99 %..

Toner à faible émission
Close
Low-Emissions Toner

Les toners à faible émission utilisés par Clover Imaging Group ont été pré-approuvés par Nordic Ecolabelling pour une utilisation dans les cartouches de toner remanufacturées certifiées Nordic Swan Ecolabel. Ces toners sont spécialement formulés pour garantir que les exigences applicables du Nordic Swan Ecolabel sont respectées, y compris des critères fixant des limites strictes aux émissions de composés organiques volatils et interdisant la présence de certains polluants et autres substances nocives..

Close

Sign Up For More Information

- SIGN UP TODAY! -
Close

Thanks For Signing Up!

Register now to start saving 40% over OEM pricing

2022 Aspire Sustainability Comparative LCA, commissioned by Clover Imaging Group.

Information
Close
Information
Fermer
Information
Close
 
Close

 
Close

INFORMATION
Close

Êtes-vous certains de vouloir procéder à la déconnexion?

INFORMATION
Fermer

Appuyez sur OK pour passer à la région Clover Imaging Group

Choix multiples
Close

Cet article est disponible pour vente inconditionnelle ou échange d'achat.
Veuillez faire un choix ci-dessous.

Récupérer les données de compte
Close
Pour récupérer vos données de connexion, veuillez entrer votre courriel:
 
Veuillez patienter...
Loader
Information

Nous vous remercions pour l'intérêt que vous portez à CIG! En raison de la fonctionnalité robuste sur notre site, nous ne pouvons que soutenir les navigateurs Web les plus courants. Nous vous recommandons de mettre à niveau votre navigateur à la dernière version de Internet Explorer, Google Chrome ou Mozilla Firefox.

Information

Votre session prendra fin dans5minute(s).


Information

Votre session est expirée. Vous êtes maintenant déconnecté.


Erreur information introuvable
Close
Merci
Close
Vidéo
Close
Vidéo
Close
Vidéo
Close
Vidéo
Close
Vidéo
Close
Tutoriels en ligne
Close
Téléverser logo
Close

Formats autorisés : .jpg, .png, .bmp; Max:1024x768px; Min:590x307px.

Renseignements d'expédition ()

Close
INFORMATION
Close

La création de votre document est en cours. Veuillez attendre le téléchargement.


Modalités et conditions
Close
Liste d'adresses de livraison Voir toutes les adresses
Close
Cliquer sur l'adresse pour la sélectionner
Ajouter une nouvelle Expédier-à adresse
Close
* Champ obligatoire
Comment ça marche?
Close

Cliquer sur le bouton vert "Créer nouvel utilisateur"

Remplissez les champs du formulaire pour votre nouvel utilisateur. Sélectionnez les autorisations de votre nouvel utilisateur et attribuer-lui un nom d'utilisateur et mot de passe. Cliquez sur Enregistrer. Vous recevrez un courriel confirmant que le nouvel utilisateur a été créé avec succès. Suivez ces instructions pour configurer chaque nouvel utilisateur.

Après avoir créé un nouvel utilisateur, le nouvel utilisateur recevra un courriel automatisé avec son nouveau nom d'utilisateur et mot de passe. Il recevra des instructions sur la façon de changer un mot de passe s'il souhaite changer ce mot de passe éventuellement. Cependant, en tant qu'administrateur, vous pourrez toujours supprimer/modifier les utilisateurs, voir leurs renseignements de profil (y compris leur mot de passe ) et modifier leurs autorisations.

Si vous devez modifier un utilisateur, il existe des liens à côté de chaque utilisateur pour modifier ou supprimer le profil de l'utilisateur.

Si vous supprimez un utilisateur, l'utilisateur apparaîtra désormais sur la Page des utilisateurs supprimés, mais vous pouvez réactiver à tout moment si vous avez besoin de le faire.

Vidéo CIG
Close
Information
Close

Télécharger termes et conditions
Close

Formats autorisés : .jpg, .png, .bmp; Max:1024x768px; Min:590x307px.

Téléverser logo du client
Close

Formats autorisés : .jpg, .png, .bmp; Max:1024x768px; Min:590x307px.

Warning 
Close

Please note that this is a bid item that's part of the Silver Bullet program. Make sure that you have been approved to ship Silver Bullet items to this customer prior to placing an order. If this customer has not been approved, the order will be cancelled. Thank you.

Warning 
Close

Please note that at least one of selected items is a bid item that's part of the Silver Bullet program. Make sure that you have been approved to ship Silver Bullet items to this customer prior to placing an order. If this customer has not been approved, the order will be cancelled. Thank you.

Formation
Close
Courriel
Close
Pour télécharger ce certificat, veuillez saisir votre adresse courriel. Vous recevrez le fichier demandé dans les 10 prochaines minutes.
 
La collecte et l'utilisation de l'adresse courriel est régie par notre Politique de confidentialité