Home / Products / Postage / Non Branded Postage

Remanufactured Postage Meter Black Ink Cartridge for Pitney Bowes 787-3

Pitney Bowes - 787-3

Remanufactured Postage Meter Black Ink Cartridge for Pitney Bowes 787-3

How do I purchase these products?

RESELLER

If you are a reseller, please log-in or register to become a Clover dealer.

BUSINESS OR CONSUMER

Please fill out this brief form to be connected to a reseller.

BUSINESS OR CONSUMER

Thank you for your interest!

Your request has been forwarded to your local Clover Imaging products dealer and you will be contacted within 2 business days.

Technical Specifications

Compatible with following printers:

Pitney Bowes
  • Connect+ 1000
  • Connect+ 2000
  • Connect+ 3000
  • SendPro P

Cross Compatible OEM numbers:

  • Pitney Bowes 787-3

Product Box Dimensions:

  • EA
  • 4.5 in
  • 3.25 in
  • 2 in
  • 0.2 lbs

Videos and Downloads

Downloads:

Product Troubleshooting

Possible Troubleshooting

Important Please Read First!

Do not remove the ink cartridge if the printhead is not installed in the printer. When the cartridge and printhead are removed at the same time, ink from the supply line will leak from the tube and drip from the needle in the cartridge carriage out into the printer and interior.

  • If the Low Ink or Out of Ink Warning is displayed, select “Replace ink cartridge”
  • Otherwise, on the Home screen of your printer push the “Settings” button.
  • Choose “Hardware”, and then choose “Printer”.
  • Next choose the “Ink cartridges” tab, and then “Replace ink cartridge”.
  • Open the cover and remove the ink cartridge by pulling it straight out of the machine. Note the orientation of the ink cartridge as you remove it from the machine.
  • You will see a warning that an ink cartridge is not installed. Press “Clear message”.
  • Remove the replacement cartridge from the bag.
  • Be sure the alignment of the replacement cartridge is the same as the cartridge you removed, and push it into place.
  • Close the cover.
  • Choose “Print test sample” to confirm that the replacement cartridge has been correctly installed.
  • If the lines on the sample are solid and the sample is of good quality, choose “Image is OK – Done”.
  • If the lines on the sample are not acceptable, you will want to clean the print heads to improve the quality of the print. For help on how to clean the print heads, select the Poor Print Quality troubleshooting option.

If your system prints in color, you should align the print heads after installing a replacement cartridge.

  • Press the “Settings” button on the home screen of your printer.
  • Choose “Hardware” from the Settings screen.
  • Choose the “Print head” tab.
  • Push the “Align print heads” button, and that screen will appear.
  • You will be prompted to choose what you would like to align
  • Envelope and tape
  • Envelope only
  • Tape only
  • Please consult your printer’s user manual for detailed instructions on how to align the media you would like to choose.
If you receive an Error Message or Code of 04184200A9, this means that the cartridge installed is not being recognized properly.

  • Remove the cartridge and locate the chip on the bottom of the cartridge.
  • If possible, clean the chip with a lint-free cloth such as a coffee filter.
  • Reinstall the cartridge.
  • If the low ink message is still displayed, there may be a problem with the chip on the cartridge; and you should contact the seller of your remanufactured cartridge.
If you have just installed a replacement cartridge and receive a “Low Ink Warning” message, carefully remove the cartridge from the printer and locate the chip on the bottom of the cartridge.

  • If possible, clean the chip with a lint-free cloth such as a coffee filter and reinstall into the printer.
  • If the low ink message is still displayed, there may be a problem with the chip on the cartridge; and you should contact the seller of your remanufactured cartridge.

If the cartridge has been in use for awhile, the “Low Ink Warning” indicates that there is enough ink for about 10 more days of mailing. If you choose to ignore this warning, the message will be displayed again about 2 days before the ink runs out.

When the “Out of Ink” warning is displayed, you will need to replace the ink cartridge.
If your postage machine is producing poor impressions, you may need to clean the print heads.

Please keep in mind that this process may vary by machine and that you may also consult your machine’s user manual for instructions on performing a cleaning cycle.

  1. Push the “Settings” button on the home screen on your printer.
  2. Next choose “Hardware”.
  3. Choose “Printer”, then the “Print head” tab.
  4. Choose “Clean print head”. The cleaning will take about one minute.
  5. When the print head cleaning has been completed, the printer will prompt you to print a sample.
Important Please Read First!

Do not remove the ink cartridge if the printhead is not installed in the printer. When the cartridge and printhead are removed at the same time, ink from the supply line will leak from the tube and drip from the needle in the cartridge carriage out into the printer and interior.

  • If the Low Ink or Out of Ink Warning is displayed, select “Replace ink cartridge”
  • Otherwise, on the Home screen of your printer push the “Settings” button.
  • Choose “Hardware”, and then choose “Printer”.
  • Next choose the “Ink cartridges” tab, and then “Replace ink cartridge”.
  • Open the cover and remove the ink cartridge by pulling it straight out of the machine. Note the orientation of the ink cartridge as you remove it from the machine.
  • You will see a warning that an ink cartridge is not installed. Press “Clear message”.
  • Remove the replacement cartridge from the bag.
  • Be sure the alignment of the replacement cartridge is the same as the cartridge you removed, and push it into place.
  • Close the cover.
  • Choose “Print test sample” to confirm that the replacement cartridge has been correctly installed.
  • If the lines on the sample are solid and the sample is of good quality, choose “Image is OK – Done”.
  • If the lines on the sample are not acceptable, you will want to clean the print heads to improve the quality of the print. For help on how to clean the print heads, select the Poor Print Quality troubleshooting option.

If your system prints in color, you should align the print heads after installing a replacement cartridge.

  • Press the “Settings” button on the home screen of your printer.
  • Choose “Hardware” from the Settings screen.
  • Choose the “Print head” tab.
  • Push the “Align print heads” button, and that screen will appear.
  • You will be prompted to choose what you would like to align
  • Envelope and tape
  • Envelope only
  • Tape only
  • Please consult your printer’s user manual for detailed instructions on how to align the media you would like to choose.
If you receive an Error Message or Code of 04184200A9, this means that the cartridge installed is not being recognized properly.

  • Remove the cartridge and locate the chip on the bottom of the cartridge.
  • If possible, clean the chip with a lint-free cloth such as a coffee filter.
  • Reinstall the cartridge.
  • If the low ink message is still displayed, there may be a problem with the chip on the cartridge; and you should contact the seller of your remanufactured cartridge.
If you have just installed a replacement cartridge and receive a “Low Ink Warning” message, carefully remove the cartridge from the printer and locate the chip on the bottom of the cartridge.

  • If possible, clean the chip with a lint-free cloth such as a coffee filter and reinstall into the printer.
  • If the low ink message is still displayed, there may be a problem with the chip on the cartridge; and you should contact the seller of your remanufactured cartridge.

If the cartridge has been in use for awhile, the “Low Ink Warning” indicates that there is enough ink for about 10 more days of mailing. If you choose to ignore this warning, the message will be displayed again about 2 days before the ink runs out.

When the “Out of Ink” warning is displayed, you will need to replace the ink cartridge.
If your postage machine is producing poor impressions, you may need to clean the print heads.

Please keep in mind that this process may vary by machine and that you may also consult your machine’s user manual for instructions on performing a cleaning cycle.

  1. Push the “Settings” button on the home screen on your printer.
  2. Next choose “Hardware”.
  3. Choose “Printer”, then the “Print head” tab.
  4. Choose “Clean print head”. The cleaning will take about one minute.
  5. When the print head cleaning has been completed, the printer will prompt you to print a sample.
Yield increase
Close
Yield increase

Clover Imaging extended yield remanufactured printer cartridges are designed, engineered, and manufactured to offer superior quality and performance, while surpassing the OEM’s highest page yields. Extended yield cartridges guarantee higher yields and lower cost-per-page without sacrificing density or print quality. Clover Imaging’s extended yield remanufactured printer cartridges are highly sustainable and have been GreenCircle certified as closed-loop products that contain at least 86% recycled content. For businesses looking for high-quality, sustainable printing at an affordable price, the choice is clear.
Recycled Content Certified
Close
Recycled Content Certified

GreenCircle is an independent, third-party ecolabel that recognizes an organization’s commitment to reuse materials to support a circular economy and reduce their reliance on virgin materials. Clover Imaging Group remanufactured toner cartridges are GreenCircle-certified to contain 86% recycled content and inkjet cartridges are certified at 99%.
Low-Emissions Toner
Close
Low-Emissions Toner

Low-emission toners used by Clover Imaging Group have been pre-approved by Nordic Ecolabelling for use in Nordic Swan Ecolabel-certified remanufactured printer cartridges. These toners are specially formulated to ensure that applicable Nordic Swan Ecolabel requirements are met, including criteria placing strict limits on volatile organic compound emissions and prohibiting the presence of certain pollutants and other harmful substances.
Close

Sign Up For More Information

- SIGN UP TODAY! -
Close

Thanks For Signing Up!

Register now to start saving 40% over OEM pricing

Register for an Account

2022 Aspire Sustainability Comparative LCA, commissioned by Clover Imaging Group.

Information
Close
Information
Close
Information
Close
 
Close
 
Close
INFORMATION
Close

Are you sure you want to logout?
INFORMATION
Close

Press OK to switch region to Clover Imaging Group
Multiple choices
Close

This item is available for outright sale or exchange purchase.
Please choose below.

Retrieve account data
Close
To retrieve your login data, enter your email:
 
Please wait...
Loader
Information

Thank you for your interest in Clover! Due to the robust functionality on our website, we can only support the most current web browsers. We recommend upgrading your browser to the latest version of Internet Explorer, Google Chrome or Mozilla Firefox.
Information

Your session will expire in 5 minute(s).
Information

Your session has expired, you are now logged out.
Error retrieving data
Close
Provided email was not found.
Please register.
Email is not valid.
Thank you
Close
Password retrieval email has been sent. Please follow instructions in the email to change your password.
Video
Close
Video
Close
Video
Close
Video
Close
Video
Close
Web Tutorial
Close
Upload logo
Close

Allowed format: .jpg, .png, .bmp; Max:1024x768px; Min:590x307px.

Shipping Information ()

Close
INFORMATION
Close

Your document is being created. Please wait until the download initiates.
Terms and Conditions
Close
Close
Shipping Address List View all addresses
Close
Click on the address to select it
Add new Ship-To address
Close
* Required Field
How it works?
Close

Click the blue button "Create New User"

Fill out the form fields for your new user. Select which permissions your new user should have and assign a username and password. Click Save. You will receive an e-mail confirming the new user has been set up successfully. Follow this procedure to set up each new user.

After you have created a new user, the new user will receive an automated email with their new user name and password. They will be given instructions on how to change their password if they would like to choose their own. However, as an administrator, you will always have access to delete/edit users, view their profile information (including their password) and change their permissions.

If you need to edit a user, there are links beside each user to edit or delete the user’s profile.

If you delete a user, the user will now appear on the Deleted Users Page and you can Re-Activate at any time if you need to do so.

Clover Video
Close
Information
Close
Upload Terms and Conditions
Close

Allowed format: .pdf; Max file size: 5MB.
Upload Customer Logo
Close

Allowed format: .jpg, .jpeg, .png, .bmp; Max file size: 5MB.
Warning 
Close

Please note that this is a bid item that's part of the Silver Bullet program. Make sure that you have been approved to ship Silver Bullet items to this customer prior to placing an order. If this customer has not been approved, the order will be cancelled. Thank you.

Warning 
Close

Please note that at least one of selected items is a bid item that's part of the Silver Bullet program. Make sure that you have been approved to ship Silver Bullet items to this customer prior to placing an order. If this customer has not been approved, the order will be cancelled. Thank you.

Warning
Close
Reload
Email
Close
To download this certificate, please provide your email address. You will receive the requested file within 10 minutes.
 
Collection and use of email address governed by our Privacy Policy