Accueil / Produits / Encre / EPC

EPC Remanufactured High Capacity Cyan Ink Cartridge for Epson T212XL220

  • Epson - T212XL, T212XL220
  • Epson - T212XL, T212XL220

EPC Remanufactured High Capacity Cyan Ink Cartridge for Epson T212XL220

  • EPC212XL220
  • Jet d'encre
  • Epson - T212XL
    Epson - T212XL220
  • Cyan
  • 350 Pages *
  • 98%
  • High Capacity

Comment acheter ces produits?

REVENDEUR

Si vous êtes un client CIG, veuillez connexion ou Inscription Devenez distributeur.

ENTREPRISE OU CLIENT

S'il vous plaît remplir ce bref formulaire pour être connecté à un revendeur.

ENTREPRISE OU CLIENT

Merci de votre inscription!!

Votre demande a été transmise à votre revendeur local de produits Clover Imaging et vous serez contacté dans les 2 jours ouvrables.

Additional Product Information

Related Products

    • Your Product Epson - T212XL, T212XL220
      EPC Remanufactured High Capacity Cyan Ink Cartridge for Epson T212XL220
    • EPC212XL220
    • Inkjet
    • Epson - T212XL
      Epson - T212XL220
    • Cyan
    • 350 Pages *
    • 98%
    • High Capacity
    • EPC212XL220
    • Inkjet
    • Epson - T212XL
      Epson - T212XL220
    • Cyan
    • 350 Pages *
    • 98%
    • High Capacity

    • Technical Specifications

    Compatible avec les imprimantes suivantes:

    Epson
    • WorkForce WF-2830
    • WorkForce WF-2850
    • WorkForce XP-4100
    • WorkForce XP-4105

    Dimensions de boite de produit:

    • EA
    • 3.74 in
    • 0.98 in
    • 2.95 in
    • 0.2 lbs

    Videos and Downloads

    Télécharger:

    Dépannage du Produit

    Groupes de produits

    To ensure continued operation of your aftermarket printer cartridges, please follow these step-by-step instructions to Disable Automatic Firmware Updates on your printer.

    1. On the printers LCD screen, locate the "settings" icon on the main screen and press to select.


    2. Scroll down and and select "Firmware Update"  



    3. If the "Notifications" option indicates "ON" follow the next steps to disable:


    4. Select the "Notification" Option


    5. The "Notifications" are now turned off.

     

    6.  If the "Notifications" Options is already "OFF" no action is required.  





    *** Not all firmware updates disable cartridges, and some may contain important security updates. We suggest reviewing firmware release notes and periodically checking for critical security updates from your printer manufacturer so you can make an informed decision whether to install a particular firmware revision.***
    La cartouche et l’imprimante utilisées dans cette vidéo peuvent ne pas sembler identiques aux vôtres, mais les mêmes procédures utilisées dans cette vidéo peuvent être utilisées pour la cartouche pour laquell vous avez choisi de résoudre les problèmes.
    If you receive an error message stating that the “alignment failed” or that the ”alignment could not be completed”, this may indicate that the printer is not properly recognizing the cartridge.

    Remove the cartridge from your printer and locate the chip. Ensure that the chip is in place; and if so, you will want to clean it from any obstruction or debris as this may be preventing the alignment from completing.

    Using a lint free cloth (such as a coffee filter), gently wipe the chip to remove any obstruction or debris.

    Reinstall your cartridge into the printer (making sure it clicks into place), and attempt the alignment process again.

    If the error continues, it may be necessary to perform a cleaning cycle to improve the quality of the print and allow the alignment process to be completed. Every printer is different so please consult your printer’s user manual for instructions on performing a cleaning cycle on your printer.

    If you are not able to perform a cleaning cycle or if the alignment fails even after performing a cleaning cycle, please ensure that the scanner glass is clean and free from fingerprints or debris (this applies to certain models only).

    If these steps do not allow the printer to align the cartridge(s), you will need to return the cartridge(s) to the place of purchase.
    La cartouche et l’imprimante utilisées dans cette vidéo peuvent ne pas sembler identiques aux vôtres, mais les mêmes procédures utilisées dans cette vidéo peuvent être utilisées pour la cartouche pour laquell vous avez choisi de résoudre les problèmes.
    If you encounter a blinking light or an error stating that a cartridge is missing or damaged, please attempt the following procedures as possible solutions to correct the problem.

    Please note: if you have just installed your cartridge and are receiving this message, please follow the steps below.

    However, if you have been printing for awhile, it is very likely that your cartridge is out of ink and will need to be replaced.

    Begin by removing the cartridge that is causing the error from its cradle.

    Once the cartridge is removed, confirm that there is a chip intact and in the correct location.

    If the chip is missing, you should return the cartridge to its place of purchase.

    If the chip is in place, you may need to clean it from any type of obstruction or debris as this may be the cause of the error.

    • To clean the chip you may use a pencil eraser. 
    • Gently brush the chip with the eraser to remove any potential obstruction or debris. 
    • Or, you may use any type of lint free cloth such as a coffee filter. 
    • Gently wipe the chip with the cloth, again removing any type of obstruction or debris. 
    • Once this is complete, replace the cartridge in the cradle, close the lid and then follow any on screen prompts that may appear. 

    If the problem persists after returning the cartridge to its cradle, there may be some dried ink obstructing the window at the bottom of the cartridge.

    Turn your printer off, disconnect the power supply and let the cartridges sit in your printer for 1 hour.

    After 1 hour has passed, turn the printer on, remove and reinstall the trouble cartridge(s) and try your print again.

    If you have attempted these procedures and encounter the same error, there is most likely an electrical problem with the cartridge, and you should return the cartridge to the place of purchase.
    If you have cartridges installed in your machine or are installing cartridges and receive an error message stating "Cannot recognize ink cartridge. Try installing again" we apologize for the inconvenience. Epson has issued a firmware update that affects your printer model and the use of this cartridge.

    To request a replacement item for your printer, please send the following information to support@cartridge-support.com:

    1. What printer are you using?
    2. Where was your product purchased?
    3. What is the cartridge code(s)? (The cartridge code is located on a small green label on the side of the cartridge.  There will be a number such as "6.2" listed on this green label.  Please provide this information.  If you have multiple cartridges, please provide all cartridges codes and a replacement will be sent for each code you provide.
    4. Shipping address for the replacement product to be shipped to. Please be sure to include city, state and zip code.

    Once your information is received and verified, replacement product will be shipped via 2nd day service. Requests submitted without all of the information may be delayed further.
    La cartouche et l’imprimante utilisées dans cette vidéo peuvent ne pas sembler identiques aux vôtres, mais les mêmes procédures utilisées dans cette vidéo peuvent être utilisées pour la cartouche pour laquell vous avez choisi de résoudre les problèmes.
    If you have just installed a cartridge and notice that the ink gauge displays low or no ink level, begin by removing the cartridge that is causing the error from its cradle.

    Once the cartridge is removed, confirm that there is a chip intact and in the correct location.

    If the chip is missing, you should return the cartridge to its place of purchase.

    If the chip is in place, you may need to clean it from any type of obstruction or debris as this may be the cause of the error.

    To clean the chip you may use a pencil eraser. Gently brush the chip with the eraser to remove any potential obstruction or debris.

    Or, you may use any type of lint free cloth such as a coffee filter. Gently wipe the chip with the cloth, again removing any type of obstruction or debris.

    Once this is complete, replace the cartridge in the cradle, close the lid and then follow any on screen prompts that may appear.

    If your new replacement cartridge still does not show a correct ink level, there is likely a problem with the chip; and you should contact the place of purchase.

    If your cartridge has been installed and you have been printing fine for awhile, your cartridge is running low on ink and should be replaced soon. Please visit the page entitled "Low (or empty) ink level" for more information
    If your cartridge has been installed for awhile and you have been printing fine, your cartridge is running low on ink and should be replaced soon.

    EpsonT200LowInk

    You may continue to print until the printer no longer recognizes that the cartridge is installed. At this time, you will need to replace the cartridge in order to continue printing. 

    EpsonT200LowInkX

    Once the cartridge is replaced, the cartridge will once again be recognized and show an accurate ink level. 

    EpsonT200LowInkResolved

    If you just installed your cartridge and are receiving a low ink message, please visit the page entitled "I just installed my inkjet cartridge, and it is showing a low (or empty) ink level"
    La cartouche et l’imprimante utilisées dans cette vidéo peuvent ne pas sembler identiques aux vôtres, mais les mêmes procédures utilisées dans cette vidéo peuvent être utilisées pour la cartouche pour laquell vous avez choisi de résoudre les problèmes.
    If you encounter an error message stating that "you have not installed genuine Epson ink cartridges", you will need to continue through this error message to allow your printer to print your document.

    Simply follow the on-screen instructions to continue through this error message (if applicable), and select "continue".

    If prompted to continue using this ink, be sure to choose "yes". Selecting "no" will not allow your printer to use these cartridges.
    La cartouche et l’imprimante utilisées dans cette vidéo peuvent ne pas sembler identiques aux vôtres, mais les mêmes procédures utilisées dans cette vidéo peuvent être utilisées pour la cartouche pour laquell vous avez choisi de résoudre les problèmes.
    If you encounter a blinking light or an error stating that a cartridge is missing or damaged, please attempt the following procedures as possible solutions to correct the problem.

    Please note: if you have just installed your cartridge and are receiving this message, please follow the steps below.

    However, if you have been printing for awhile, it is very likely that your cartridge is out of ink and will need to be replaced.

    Begin by removing the cartridge that is causing the error from its cradle.

    Once the cartridge is removed, confirm that there is a chip intact and in the correct location.

    If the chip is missing, you should return the cartridge to its place of purchase.

    If the chip is in place, you may need to clean it from any type of obstruction or debris as this may be the cause of the error.

    • To clean the chip you may use a pencil eraser. 
    • Gently brush the chip with the eraser to remove any potential obstruction or debris. 
    • Or, you may use any type of lint free cloth such as a coffee filter. 
    • Gently wipe the chip with the cloth, again removing any type of obstruction or debris. 
    • Once this is complete, replace the cartridge in the cradle, close the lid and then follow any on screen prompts that may appear. 

    If the problem persists after returning the cartridge to its cradle, there may be some dried ink obstructing the window at the bottom of the cartridge.

    Turn your printer off, disconnect the power supply and let the cartridges sit in your printer for 1 hour.

    After 1 hour has passed, turn the printer on, remove and reinstall the trouble cartridge(s) and try your print again.

    If you have attempted these procedures and encounter the same error, there is most likely an electrical problem with the cartridge, and you should return the cartridge to the place of purchase.
    La cartouche et l’imprimante utilisées dans cette vidéo peuvent ne pas sembler identiques aux vôtres, mais les mêmes procédures utilisées dans cette vidéo peuvent être utilisées pour la cartouche pour laquell vous avez choisi de résoudre les problèmes.
    If you have printed a document and are unsatisfied with the print quality, please remove the cartridge from your printer. You can access the cartridge by following the same procedure you would to change your inkjet cartridge. This is usually accomplished by pressing a series of buttons. Please consult your printer’s user manual for instructions for your printer, if necessary.

    Once the cartridge is out of your printer, you will need to ensure that you have removed the pull tab that covers the vent at the top left corner of the cartridge. You will also need to ensure that the silver seal on the bottom of the cartridge has been punctured by the printer.

    If you have already removed the pull tab and the seal has been pierced, please reinstall your cartridge. You may need to perform a cleaning cycle to improve the quality of your print.

    This video will show you an example of how to perform a cleaning cycle through your printer's LCD screen.

    If your printer does not have an LCD screen, please select the troubleshooting for "Performing a Cleaning Cycle from your Computer" for further assistance. You may also consult your printer's user manual or the manufacturer's website for instructions on how to perform a cleaning cycle on your printer.

    • Using the arrow keys, scroll to setup and press OK 
    • Scroll to Maintenance and press OK 
    • Next scroll to Head Cleaning and press OK 
    • Press Start to begin the cleaning. 
    • The cleaning cycle will take a few minutes to complete. 
    • Once the cleaning cycle is complete, select Finish. 

    If the print is still unsatisfactory, you may perform another cleaning cycle. Please be aware that cleaning your printhead does consume ink; and therefore, should only be completed when necessary.

    If the print quality is unsatisfactory after performing the cleaning cycles, let the cartridges sit in your printer for 1 hour. After 1 hour has passed, try your print again. You may find it helpful to remove the cartridge from the printer and reinstall at this point, but please confirm that the print is still poor after the cartridge has sat undisturbed for an hour before trying this last step.

    If you have performed all these steps and the print quality is still unsatisfactory, you may need to replace your inkjet cartridge.

    Always be sure to follow the Manufacturer's instructions to gently shake a replacement cartridge with the print port down 4-5 times while still in the sealed bag before installing into your printer as this may help to prevent print quality issues.
    To ensure continued operation of your aftermarket printer cartridges, please follow these step-by-step instructions to Disable Automatic Firmware Updates on your printer.

    1. On the printers LCD screen, locate the "settings" icon on the main screen and press to select.


    2. Scroll down and and select "Firmware Update"  



    3. If the "Notifications" option indicates "ON" follow the next steps to disable:


    4. Select the "Notification" Option


    5. The "Notifications" are now turned off.

     

    6.  If the "Notifications" Options is already "OFF" no action is required.  





    *** Not all firmware updates disable cartridges, and some may contain important security updates. We suggest reviewing firmware release notes and periodically checking for critical security updates from your printer manufacturer so you can make an informed decision whether to install a particular firmware revision.***
    La cartouche et l’imprimante utilisées dans cette vidéo peuvent ne pas sembler identiques aux vôtres, mais les mêmes procédures utilisées dans cette vidéo peuvent être utilisées pour la cartouche pour laquell vous avez choisi de résoudre les problèmes.
    If you receive an error message stating that the “alignment failed” or that the ”alignment could not be completed”, this may indicate that the printer is not properly recognizing the cartridge.

    Remove the cartridge from your printer and locate the chip. Ensure that the chip is in place; and if so, you will want to clean it from any obstruction or debris as this may be preventing the alignment from completing.

    Using a lint free cloth (such as a coffee filter), gently wipe the chip to remove any obstruction or debris.

    Reinstall your cartridge into the printer (making sure it clicks into place), and attempt the alignment process again.

    If the error continues, it may be necessary to perform a cleaning cycle to improve the quality of the print and allow the alignment process to be completed. Every printer is different so please consult your printer’s user manual for instructions on performing a cleaning cycle on your printer.

    If you are not able to perform a cleaning cycle or if the alignment fails even after performing a cleaning cycle, please ensure that the scanner glass is clean and free from fingerprints or debris (this applies to certain models only).

    If these steps do not allow the printer to align the cartridge(s), you will need to return the cartridge(s) to the place of purchase.
    La cartouche et l’imprimante utilisées dans cette vidéo peuvent ne pas sembler identiques aux vôtres, mais les mêmes procédures utilisées dans cette vidéo peuvent être utilisées pour la cartouche pour laquell vous avez choisi de résoudre les problèmes.
    If you encounter a blinking light or an error stating that a cartridge is missing or damaged, please attempt the following procedures as possible solutions to correct the problem.

    Please note: if you have just installed your cartridge and are receiving this message, please follow the steps below.

    However, if you have been printing for awhile, it is very likely that your cartridge is out of ink and will need to be replaced.

    Begin by removing the cartridge that is causing the error from its cradle.

    Once the cartridge is removed, confirm that there is a chip intact and in the correct location.

    If the chip is missing, you should return the cartridge to its place of purchase.

    If the chip is in place, you may need to clean it from any type of obstruction or debris as this may be the cause of the error.

    • To clean the chip you may use a pencil eraser. 
    • Gently brush the chip with the eraser to remove any potential obstruction or debris. 
    • Or, you may use any type of lint free cloth such as a coffee filter. 
    • Gently wipe the chip with the cloth, again removing any type of obstruction or debris. 
    • Once this is complete, replace the cartridge in the cradle, close the lid and then follow any on screen prompts that may appear. 

    If the problem persists after returning the cartridge to its cradle, there may be some dried ink obstructing the window at the bottom of the cartridge.

    Turn your printer off, disconnect the power supply and let the cartridges sit in your printer for 1 hour.

    After 1 hour has passed, turn the printer on, remove and reinstall the trouble cartridge(s) and try your print again.

    If you have attempted these procedures and encounter the same error, there is most likely an electrical problem with the cartridge, and you should return the cartridge to the place of purchase.
    If you have cartridges installed in your machine or are installing cartridges and receive an error message stating "Cannot recognize ink cartridge. Try installing again" we apologize for the inconvenience. Epson has issued a firmware update that affects your printer model and the use of this cartridge.

    To request a replacement item for your printer, please send the following information to support@cartridge-support.com:

    1. What printer are you using?
    2. Where was your product purchased?
    3. What is the cartridge code(s)? (The cartridge code is located on a small green label on the side of the cartridge.  There will be a number such as "6.2" listed on this green label.  Please provide this information.  If you have multiple cartridges, please provide all cartridges codes and a replacement will be sent for each code you provide.
    4. Shipping address for the replacement product to be shipped to. Please be sure to include city, state and zip code.

    Once your information is received and verified, replacement product will be shipped via 2nd day service. Requests submitted without all of the information may be delayed further.
    La cartouche et l’imprimante utilisées dans cette vidéo peuvent ne pas sembler identiques aux vôtres, mais les mêmes procédures utilisées dans cette vidéo peuvent être utilisées pour la cartouche pour laquell vous avez choisi de résoudre les problèmes.
    If you have just installed a cartridge and notice that the ink gauge displays low or no ink level, begin by removing the cartridge that is causing the error from its cradle.

    Once the cartridge is removed, confirm that there is a chip intact and in the correct location.

    If the chip is missing, you should return the cartridge to its place of purchase.

    If the chip is in place, you may need to clean it from any type of obstruction or debris as this may be the cause of the error.

    To clean the chip you may use a pencil eraser. Gently brush the chip with the eraser to remove any potential obstruction or debris.

    Or, you may use any type of lint free cloth such as a coffee filter. Gently wipe the chip with the cloth, again removing any type of obstruction or debris.

    Once this is complete, replace the cartridge in the cradle, close the lid and then follow any on screen prompts that may appear.

    If your new replacement cartridge still does not show a correct ink level, there is likely a problem with the chip; and you should contact the place of purchase.

    If your cartridge has been installed and you have been printing fine for awhile, your cartridge is running low on ink and should be replaced soon. Please visit the page entitled "Low (or empty) ink level" for more information
    If your cartridge has been installed for awhile and you have been printing fine, your cartridge is running low on ink and should be replaced soon.

    EpsonT200LowInk

    You may continue to print until the printer no longer recognizes that the cartridge is installed. At this time, you will need to replace the cartridge in order to continue printing. 

    EpsonT200LowInkX

    Once the cartridge is replaced, the cartridge will once again be recognized and show an accurate ink level. 

    EpsonT200LowInkResolved

    If you just installed your cartridge and are receiving a low ink message, please visit the page entitled "I just installed my inkjet cartridge, and it is showing a low (or empty) ink level"
    La cartouche et l’imprimante utilisées dans cette vidéo peuvent ne pas sembler identiques aux vôtres, mais les mêmes procédures utilisées dans cette vidéo peuvent être utilisées pour la cartouche pour laquell vous avez choisi de résoudre les problèmes.
    If you encounter an error message stating that "you have not installed genuine Epson ink cartridges", you will need to continue through this error message to allow your printer to print your document.

    Simply follow the on-screen instructions to continue through this error message (if applicable), and select "continue".

    If prompted to continue using this ink, be sure to choose "yes". Selecting "no" will not allow your printer to use these cartridges.
    La cartouche et l’imprimante utilisées dans cette vidéo peuvent ne pas sembler identiques aux vôtres, mais les mêmes procédures utilisées dans cette vidéo peuvent être utilisées pour la cartouche pour laquell vous avez choisi de résoudre les problèmes.
    If you encounter a blinking light or an error stating that a cartridge is missing or damaged, please attempt the following procedures as possible solutions to correct the problem.

    Please note: if you have just installed your cartridge and are receiving this message, please follow the steps below.

    However, if you have been printing for awhile, it is very likely that your cartridge is out of ink and will need to be replaced.

    Begin by removing the cartridge that is causing the error from its cradle.

    Once the cartridge is removed, confirm that there is a chip intact and in the correct location.

    If the chip is missing, you should return the cartridge to its place of purchase.

    If the chip is in place, you may need to clean it from any type of obstruction or debris as this may be the cause of the error.

    • To clean the chip you may use a pencil eraser. 
    • Gently brush the chip with the eraser to remove any potential obstruction or debris. 
    • Or, you may use any type of lint free cloth such as a coffee filter. 
    • Gently wipe the chip with the cloth, again removing any type of obstruction or debris. 
    • Once this is complete, replace the cartridge in the cradle, close the lid and then follow any on screen prompts that may appear. 

    If the problem persists after returning the cartridge to its cradle, there may be some dried ink obstructing the window at the bottom of the cartridge.

    Turn your printer off, disconnect the power supply and let the cartridges sit in your printer for 1 hour.

    After 1 hour has passed, turn the printer on, remove and reinstall the trouble cartridge(s) and try your print again.

    If you have attempted these procedures and encounter the same error, there is most likely an electrical problem with the cartridge, and you should return the cartridge to the place of purchase.
    La cartouche et l’imprimante utilisées dans cette vidéo peuvent ne pas sembler identiques aux vôtres, mais les mêmes procédures utilisées dans cette vidéo peuvent être utilisées pour la cartouche pour laquell vous avez choisi de résoudre les problèmes.
    If you have printed a document and are unsatisfied with the print quality, please remove the cartridge from your printer. You can access the cartridge by following the same procedure you would to change your inkjet cartridge. This is usually accomplished by pressing a series of buttons. Please consult your printer’s user manual for instructions for your printer, if necessary.

    Once the cartridge is out of your printer, you will need to ensure that you have removed the pull tab that covers the vent at the top left corner of the cartridge. You will also need to ensure that the silver seal on the bottom of the cartridge has been punctured by the printer.

    If you have already removed the pull tab and the seal has been pierced, please reinstall your cartridge. You may need to perform a cleaning cycle to improve the quality of your print.

    This video will show you an example of how to perform a cleaning cycle through your printer's LCD screen.

    If your printer does not have an LCD screen, please select the troubleshooting for "Performing a Cleaning Cycle from your Computer" for further assistance. You may also consult your printer's user manual or the manufacturer's website for instructions on how to perform a cleaning cycle on your printer.

    • Using the arrow keys, scroll to setup and press OK 
    • Scroll to Maintenance and press OK 
    • Next scroll to Head Cleaning and press OK 
    • Press Start to begin the cleaning. 
    • The cleaning cycle will take a few minutes to complete. 
    • Once the cleaning cycle is complete, select Finish. 

    If the print is still unsatisfactory, you may perform another cleaning cycle. Please be aware that cleaning your printhead does consume ink; and therefore, should only be completed when necessary.

    If the print quality is unsatisfactory after performing the cleaning cycles, let the cartridges sit in your printer for 1 hour. After 1 hour has passed, try your print again. You may find it helpful to remove the cartridge from the printer and reinstall at this point, but please confirm that the print is still poor after the cartridge has sat undisturbed for an hour before trying this last step.

    If you have performed all these steps and the print quality is still unsatisfactory, you may need to replace your inkjet cartridge.

    Always be sure to follow the Manufacturer's instructions to gently shake a replacement cartridge with the print port down 4-5 times while still in the sealed bag before installing into your printer as this may help to prevent print quality issues.

    * Rendement de page basé sur des impressions avec une couverture de page de 5 %.

    Yield increase
    Close
    Yield increase

    Les cartouches d’imprimante remanufacturées à rendement étendu de Clover Imaging sont conçues, élaborées et fabriquées pour offrir une qualité supérieure et une performance améliorée, tout en surpassant les rendements de pages les plus élevés du fabricant d’origine. Les cartouches à rendement étendu garantissent des rendements plus élevés et un coût par page plus bas sans sacrifier la densité ni la qualité d’impression. Les cartouches d’imprimante remanufacturées à rendement étendu de Clover Imaging sont très durables et ont été certifiées par GreenCircle comme produits en circuit fermé contenant au moins 86 % de contenu recyclé. Pour les entreprises à la recherche d’une impression de haute qualité, durable et à un prix abordable, le choix est évident.
    Contenu recyclé certifié
    Close
    Recycled Content Certified

    GreenCircle est un écolabel indépendant et tiers qui reconnaît l'engagement d'une organisation à réutiliser les matériaux pour soutenir une économie circulaire et réduire sa dépendance aux matières vierges. Les cartouches de toner remanufacturées de Clover Imaging Group sont certifiées GreenCircle pour contenir 86 % de contenu recyclé et les cartouches d'encre sont certifiées à 99 %..
    Toner à faible émission
    Close
    Low-Emissions Toner

    Les toners à faible émission utilisés par Clover Imaging Group ont été pré-approuvés par Nordic Ecolabelling pour une utilisation dans les cartouches de toner remanufacturées certifiées Nordic Swan Ecolabel. Ces toners sont spécialement formulés pour garantir que les exigences applicables du Nordic Swan Ecolabel sont respectées, y compris des critères fixant des limites strictes aux émissions de composés organiques volatils et interdisant la présence de certains polluants et autres substances nocives..
    Close

    Sign Up For More Information

    - SIGN UP TODAY! -
    Close

    Thanks For Signing Up!

    Register now to start saving 40% over OEM pricing

    Register for an Account

    2022 Aspire Sustainability Comparative LCA, commissioned by Clover Imaging Group.

    Information
    Close
    Information
    Fermer
    Information
    Close
     
    Close
     
    Close
    INFORMATION
    Close

    Êtes-vous certains de vouloir procéder à la déconnexion?
    INFORMATION
    Fermer

    Appuyez sur OK pour passer à la région Clover Imaging Group
    Choix multiples
    Close

    Cet article est disponible pour vente inconditionnelle ou échange d'achat.
    Veuillez faire un choix ci-dessous.

    Récupérer les données de compte
    Close
    Pour récupérer vos données de connexion, veuillez entrer votre courriel:
     
    Veuillez patienter...
    Loader
    Information

    Nous vous remercions pour l'intérêt que vous portez à CIG! En raison de la fonctionnalité robuste sur notre site, nous ne pouvons que soutenir les navigateurs Web les plus courants. Nous vous recommandons de mettre à niveau votre navigateur à la dernière version de Internet Explorer, Google Chrome ou Mozilla Firefox.
    Information

    Votre session prendra fin dans5minute(s).
    Information

    Votre session est expirée. Vous êtes maintenant déconnecté.
    Erreur information introuvable
    Close
    La courriel fourni est introuvable.
    S'il vous plaît Inscription.
    Courriel n'est pas valide.
    Merci
    Close
    Courriel pour récupération du mot de passe a été envoyé. Veuillez suivre les instructions dans le courriel pour changer votre mot de passe.
    Vidéo
    Close
    Vidéo
    Close
    Vidéo
    Close
    Vidéo
    Close
    Vidéo
    Close
    Tutoriels en ligne
    Close
    Téléverser logo
    Close

    Formats autorisés : .jpg, .png, .bmp; Max:1024x768px; Min:590x307px.

    Renseignements d'expédition ()

    Close
    INFORMATION
    Close

    La création de votre document est en cours. Veuillez attendre le téléchargement.
    Modalités et conditions
    Close
    Close
    Liste d'adresses de livraison Voir toutes les adresses
    Close
    Cliquer sur l'adresse pour la sélectionner
    Ajouter une nouvelle Expédier-à adresse
    Close
    * Champ obligatoire
    Comment ça marche?
    Close

    Cliquer sur le bouton vert "Créer nouvel utilisateur"

    Remplissez les champs du formulaire pour votre nouvel utilisateur. Sélectionnez les autorisations de votre nouvel utilisateur et attribuer-lui un nom d'utilisateur et mot de passe. Cliquez sur Enregistrer. Vous recevrez un courriel confirmant que le nouvel utilisateur a été créé avec succès. Suivez ces instructions pour configurer chaque nouvel utilisateur.

    Après avoir créé un nouvel utilisateur, le nouvel utilisateur recevra un courriel automatisé avec son nouveau nom d'utilisateur et mot de passe. Il recevra des instructions sur la façon de changer un mot de passe s'il souhaite changer ce mot de passe éventuellement. Cependant, en tant qu'administrateur, vous pourrez toujours supprimer/modifier les utilisateurs, voir leurs renseignements de profil (y compris leur mot de passe ) et modifier leurs autorisations.

    Si vous devez modifier un utilisateur, il existe des liens à côté de chaque utilisateur pour modifier ou supprimer le profil de l'utilisateur.

    Si vous supprimez un utilisateur, l'utilisateur apparaîtra désormais sur la Page des utilisateurs supprimés, mais vous pouvez réactiver à tout moment si vous avez besoin de le faire.

    Vidéo CIG
    Close
    Information
    Close
    Télécharger termes et conditions
    Close

    Formats autorisés : .jpg, .png, .bmp; Max:1024x768px; Min:590x307px.
    Téléverser logo du client
    Close

    Formats autorisés : .jpg, .png, .bmp; Max:1024x768px; Min:590x307px.
    Warning 
    Close

    Please note that this is a bid item that's part of the Silver Bullet program. Make sure that you have been approved to ship Silver Bullet items to this customer prior to placing an order. If this customer has not been approved, the order will be cancelled. Thank you.

    Warning 
    Close

    Please note that at least one of selected items is a bid item that's part of the Silver Bullet program. Make sure that you have been approved to ship Silver Bullet items to this customer prior to placing an order. If this customer has not been approved, the order will be cancelled. Thank you.

    Formation
    Close
    Recharger
    Courriel
    Close
    Pour télécharger ce certificat, veuillez saisir votre adresse courriel. Vous recevrez le fichier demandé dans les 10 prochaines minutes.
     
    La collecte et l'utilisation de l'adresse courriel est régie par notre Politique de confidentialité