Home / Products / Postage / Non Branded Postage

Non-OEM New Postage Meter Red Ink Cartridge for Pitney Bowes 765-9

  • Pitney Bowes - 765-9
  • Pitney Bowes - 765-9

Non-OEM New Postage Meter Red Ink Cartridge for Pitney Bowes 765-9

How do I purchase these products?

RESELLER

If you are a reseller, please log-in or register to become a Clover dealer.

BUSINESS OR CONSUMER

Please fill out this brief form to be connected to a reseller.

BUSINESS OR CONSUMER

Thank you for your interest!

Your request has been forwarded to your local Clover Imaging products dealer and you will be contacted within 2 business days.

Technical Specifications

Compatible with following printers:

Pitney Bowes
  • 9H00
  • DM300c
  • DM400c
  • DM450c
  • DM475c
  • G900
  • SendPro C Auto

Cross Compatible OEM numbers:

  • Pitney Bowes 765-9
  • Pitney Bowes 765-9RN

Product Box Dimensions:

  • EA
  • 3.3465 in
  • 2.1653 in
  • 2.0473 in
  • 0.18 lbs

Videos and Downloads

Downloads:

Product Troubleshooting

Possible Troubleshooting

Please follow these instructions to install your new cartridge

  • Open the top cover.
  • Select "Replace Ink Tank" on the front panel.
  • When the ink tank is in position, open the hold down latch and remove the old cartridge.
  • Remove the foil seal on the bottom of the new cartridge.
  • Install the new cartridge and close the hold down latch.
  • Close the cover of the meter to complete the installation.

If the machine displays a message stating "Some Non PBI Ink cartridges may damage meter", press OK or Continue to proceed past this message.



It is important to note that most remanufactured postal cartridges are 100% guaranteed. Most manufacturers warrant against any damage to your printer.
If you have installed a new postal meter and the machine displays a message stating "Some Non PBI Ink cartridges may damage meter", press OK or Continue to proceed past this message.



It is important to note that most remanufactured postal cartridges are 100% guaranteed. Most manufacturers warrant against any damage to your printer.
If your postage machine is producing poor impressions, you may need to run a cleaning cycle or purge.

Please keep in mind that this process may vary by machine and that you may consult your machine’s user manual for instructions on performing a cleaning cycle.

  • To begin press the Menu button.
  • Select Maintenance.
  • Select Printer Maintenance.
  • Select Clean Printer Nozzle.
  • You will see a choice of four purges. Selecting Purge C is usually enough to purge the system.

The system will begin a purge which may take a few moments. When the purge is finished, the screen will display Cleaning Complete.

Select Print Test Pattern to print a test pattern.

  • Follow the prompts to print the test pattern on an envelope or tape strip.
  • When the test pattern has been printed, the system will display prompts asking if the test pattern is OK. A poor test print will contain missing lines whereas a good test print will not.


  • If yes, select Yes and the Home screen returns
  • If no, select No, Clean Nozzle and the system will execute a purge. This may take a few moments. When finished, the screen displays: Cleaning Complete.
  • Select Done to return to the Printer Maintenance menu

If the print on your test page is satisfactory, you may return to the document you wish to print and resume printing. Or you may also perform another cleaning cycle if you are not satisfied with your test page. Please be aware that cleaning your printhead does consume ink; and therefore, should only be completed when necessary.

  • Select Another Purge to choose a different purge
  • Select Done to return to the Printer Maintenance menu

If the print quality still hasn’t improved, you may need to replace the machine’s printhead.
Please follow these instructions to install your new cartridge

  • Open the top cover.
  • Select "Replace Ink Tank" on the front panel.
  • When the ink tank is in position, open the hold down latch and remove the old cartridge.
  • Remove the foil seal on the bottom of the new cartridge.
  • Install the new cartridge and close the hold down latch.
  • Close the cover of the meter to complete the installation.

If the machine displays a message stating "Some Non PBI Ink cartridges may damage meter", press OK or Continue to proceed past this message.



It is important to note that most remanufactured postal cartridges are 100% guaranteed. Most manufacturers warrant against any damage to your printer.
If you have installed a new postal meter and the machine displays a message stating "Some Non PBI Ink cartridges may damage meter", press OK or Continue to proceed past this message.



It is important to note that most remanufactured postal cartridges are 100% guaranteed. Most manufacturers warrant against any damage to your printer.
If your postage machine is producing poor impressions, you may need to run a cleaning cycle or purge.

Please keep in mind that this process may vary by machine and that you may consult your machine’s user manual for instructions on performing a cleaning cycle.

  • To begin press the Menu button.
  • Select Maintenance.
  • Select Printer Maintenance.
  • Select Clean Printer Nozzle.
  • You will see a choice of four purges. Selecting Purge C is usually enough to purge the system.

The system will begin a purge which may take a few moments. When the purge is finished, the screen will display Cleaning Complete.

Select Print Test Pattern to print a test pattern.

  • Follow the prompts to print the test pattern on an envelope or tape strip.
  • When the test pattern has been printed, the system will display prompts asking if the test pattern is OK. A poor test print will contain missing lines whereas a good test print will not.


  • If yes, select Yes and the Home screen returns
  • If no, select No, Clean Nozzle and the system will execute a purge. This may take a few moments. When finished, the screen displays: Cleaning Complete.
  • Select Done to return to the Printer Maintenance menu

If the print on your test page is satisfactory, you may return to the document you wish to print and resume printing. Or you may also perform another cleaning cycle if you are not satisfied with your test page. Please be aware that cleaning your printhead does consume ink; and therefore, should only be completed when necessary.

  • Select Another Purge to choose a different purge
  • Select Done to return to the Printer Maintenance menu

If the print quality still hasn’t improved, you may need to replace the machine’s printhead.

* Page yield based on 5% page coverage prints.

Yield increase
Close
Yield increase

Clover Imaging extended yield remanufactured printer cartridges are designed, engineered, and manufactured to offer superior quality and performance, while surpassing the OEM’s highest page yields. Extended yield cartridges guarantee higher yields and lower cost-per-page without sacrificing density or print quality. Clover Imaging’s extended yield remanufactured printer cartridges are highly sustainable and have been GreenCircle certified as closed-loop products that contain at least 86% recycled content. For businesses looking for high-quality, sustainable printing at an affordable price, the choice is clear.
Recycled Content Certified
Close
Recycled Content Certified

GreenCircle is an independent, third-party ecolabel that recognizes an organization’s commitment to reuse materials to support a circular economy and reduce their reliance on virgin materials. Clover Imaging Group remanufactured toner cartridges are GreenCircle-certified to contain 86% recycled content and inkjet cartridges are certified at 99%.
Low-Emissions Toner
Close
Low-Emissions Toner

Low-emission toners used by Clover Imaging Group have been pre-approved by Nordic Ecolabelling for use in Nordic Swan Ecolabel-certified remanufactured printer cartridges. These toners are specially formulated to ensure that applicable Nordic Swan Ecolabel requirements are met, including criteria placing strict limits on volatile organic compound emissions and prohibiting the presence of certain pollutants and other harmful substances.
Close

Sign Up For More Information

- SIGN UP TODAY! -
Close

Thanks For Signing Up!

Register now to start saving 40% over OEM pricing

Register for an Account

2022 Aspire Sustainability Comparative LCA, commissioned by Clover Imaging Group.

Information
Close
Information
Close
Information
Close
 
Close
 
Close
INFORMATION
Close

Are you sure you want to logout?
INFORMATION
Close

Press OK to switch region to Clover Imaging Group
Multiple choices
Close

This item is available for outright sale or exchange purchase.
Please choose below.

Retrieve account data
Close
To retrieve your login data, enter your email:
 
Please wait...
Loader
Information

Thank you for your interest in Clover! Due to the robust functionality on our website, we can only support the most current web browsers. We recommend upgrading your browser to the latest version of Internet Explorer, Google Chrome or Mozilla Firefox.
Information

Your session will expire in 5 minute(s).
Information

Your session has expired, you are now logged out.
Error retrieving data
Close
Provided email was not found.
Please register.
Email is not valid.
Thank you
Close
Password retrieval email has been sent. Please follow instructions in the email to change your password.
Video
Close
Video
Close
Video
Close
Video
Close
Video
Close
Web Tutorial
Close
Upload logo
Close

Allowed format: .jpg, .png, .bmp; Max:1024x768px; Min:590x307px.

Shipping Information ()

Close
INFORMATION
Close

Your document is being created. Please wait until the download initiates.
Terms and Conditions
Close
Close
Shipping Address List View all addresses
Close
Click on the address to select it
Add new Ship-To address
Close
* Required Field
How it works?
Close

Click the blue button "Create New User"

Fill out the form fields for your new user. Select which permissions your new user should have and assign a username and password. Click Save. You will receive an e-mail confirming the new user has been set up successfully. Follow this procedure to set up each new user.

After you have created a new user, the new user will receive an automated email with their new user name and password. They will be given instructions on how to change their password if they would like to choose their own. However, as an administrator, you will always have access to delete/edit users, view their profile information (including their password) and change their permissions.

If you need to edit a user, there are links beside each user to edit or delete the user’s profile.

If you delete a user, the user will now appear on the Deleted Users Page and you can Re-Activate at any time if you need to do so.

Clover Video
Close
Information
Close
Upload Terms and Conditions
Close

Allowed format: .pdf; Max file size: 5MB.
Upload Customer Logo
Close

Allowed format: .jpg, .jpeg, .png, .bmp; Max file size: 5MB.
Warning 
Close

Please note that this is a bid item that's part of the Silver Bullet program. Make sure that you have been approved to ship Silver Bullet items to this customer prior to placing an order. If this customer has not been approved, the order will be cancelled. Thank you.

Warning 
Close

Please note that at least one of selected items is a bid item that's part of the Silver Bullet program. Make sure that you have been approved to ship Silver Bullet items to this customer prior to placing an order. If this customer has not been approved, the order will be cancelled. Thank you.

Warning
Close
Reload
Email
Close
To download this certificate, please provide your email address. You will receive the requested file within 10 minutes.
 
Collection and use of email address governed by our Privacy Policy