Clover Imaging Remanufactured Super High Yield Black Ink Cartridge for Brother LC109XXL

  • Brother - LC109XXL, LC109BK
  • Brother - LC109XXL, LC109BK
  • Brother - LC109XXL, LC109BK
  • Additional image

Clover Imaging Remanufactured Super High Yield Black Ink Cartridge for Brother LC109XXL

  • 118074
  • Jet d'encre
  • Brother - LC109XXL
    Brother - LC109BK
  • Noir
  • 2,400 Pages *
  • 48%
  • Super High Yield

Comment acheter ces produits?

REVENDEUR

Si vous êtes un client CIG, veuillez connexion ou Inscription Devenez distributeur.

ENTREPRISE OU CLIENT

S'il vous plaît remplir ce bref formulaire pour être connecté à un revendeur.

ENTREPRISE OU CLIENT

Merci de votre inscription!!

Votre demande a été transmise à votre revendeur local de produits Clover Imaging et vous serez contacté dans les 2 jours ouvrables.

Additional Product Information

Technical Specifications

Compatible avec les imprimantes suivantes:

Brother
  • MFC-J6720DW
  • MFC-J6920DW

Dimensions de boite de produit:

  • EA
  • 3.25 in
  • 2 in
  • 4.25 in
  • 0.2 lbs

Videos and Downloads

Télécharger:

Dépannage du Produit

Groupes de produits

La cartouche et l’imprimante utilisées dans cette vidéo peuvent ne pas sembler identiques aux vôtres, mais les mêmes procédures utilisées dans cette vidéo peuvent être utilisées pour la cartouche pour laquell vous avez choisi de résoudre les problèmes.
If you receive an error message stating that the “alignment failed” or that the ”alignment could not be completed”, this may indicate that the printer is not properly recognizing the cartridge.

Remove the cartridge from your printer, and locate the chip on the top of the cartridge. Ensure that the chip is intact; and if so, you will want to clean the chip from any obstruction or debris as this may be preventing the alignment from completing.

Using a lint free cloth (such as a coffee filter), gently wipe the chip to remove any obstruction or debris.

Slowly reinstall the cartridge and attempt the alignment process again.

If the error continues, it may be necessary to perform a cleaning cycle to improve the quality of the print and allow the alignment process to be completed. Every printer is different so please consult your printer’s user manual for instructions on performing a cleaning cycle on your printer.

If you are not able to perform a cleaning cycle or if the alignment fails even after performing a cleaning cycle, please ensure that the scanner glass is clean and free from fingerprints or debris (this applies to certain models only).

If these steps do not allow the printer to align the cartridge(s), you will need to return the cartridge(s) to the place of purchase.
La cartouche et l’imprimante utilisées dans cette vidéo peuvent ne pas sembler identiques aux vôtres, mais les mêmes procédures utilisées dans cette vidéo peuvent être utilisées pour la cartouche pour laquell vous avez choisi de résoudre les problèmes.
If your printer gives you an error message stating that the cartridge cannot be detected or has blinking lights, there may be a simple solution to fix this.
  • Confirm that the cartridge pictured matches the cartridge you have in your hand or installed in your machine.
  • Confirm that the printer you are using is listed in the printer compatibility table as a suitable printer for the cartridge you are trying to install.
  • If ONE of these TWO criteria do NOT match, you have most likely received the incorrect cartridge for your printer. Please visit our PRINTER COMPATIBILITY page in order to determine what cartridge you need for your machine.

Once you have confirmed you have the correct cartridge for your printer, follow any on-screen prompts and open the cover on the printer.

Remove the cartridge and close the cover.

Locate the chip on the top of the cartridge. If the chip is missing or not in the proper location, you will need to return the cartridge to the place of purchase.

Once you have confirmed that the chip is in the proper location, you may need to clean it from any type of obstruction or debris as this may be the cause of the error.

To clean the chip, you may use a pencil eraser.
  • Gently brush the chip with the eraser to remove any potential obstruction or debris. 
  • Or you may use any type of lint free cloth such as a coffee filter. Gently wipe the chip with the cloth, again removing any type of obstruction or debris. 
Replace the cartridge in the cradle, close the lid and again follow any on-screen prompts that may appear.

If the problem persists after returning the cartridge to its cradle, you should reset your printer.
  • This can be done by turning off your computer and your printer with the cartridges installed. 
  • Unplug your printer and leave your machines off for 2 minutes. 
  • Restart the printer and your computer, and attempt your print again. 

If the cartridge is still not being recognized after you have completed the above steps, make sure you are installing the cartridge into the correct location in your printer.
  • Please consult your printer's user manual for information on how to correctly install your remanufactured cartridge.

If the error persists after attempting all troubleshooting steps, you will need to return your cartridge to the place of purchase.
La cartouche et l’imprimante utilisées dans cette vidéo peuvent ne pas sembler identiques aux vôtres, mais les mêmes procédures utilisées dans cette vidéo peuvent être utilisées pour la cartouche pour laquell vous avez choisi de résoudre les problèmes.
If you have just installed a remanufactured cartridge and the ink levels display as low or empty, there may be a solution for this problem.

Remove the cartridge or cartridges displaying a low ink level from your printer. Locate the chip on the top of the cartridge.

You may need to clean the chip from any obstruction or debris.

To do so, you may use a pencil eraser. Gently brush the chip with the eraser to remove any potential obstruction or debris.

Or you may use any type of lint free cloth such as a coffee filter. Gently wipe the chip with the cloth, again removing any type of obstruction or debris.

Once this is complete, replace the cartridge in the cradle and follow any on-screen prompts.

If a low or empty ink level still shows, remove the cartridge from your printer and close the cover, turn the machine off and disconnect the power supply for 2 minutes.

When 2 minutes have passed, turn your printer back on and reinstall the cartridge when prompted.

If the error persists, you should return your cartridge to the place of purchase.
In the event your cartridge does not appear to fit into the machine, please look at the print port on the cartridge. Some inkjets may have a protective covering that will need to be punctured upon insertion into your printer, as indicated in the image below.



The puncturing of this material will allow for the cartridge to be seated into the space properly. If your cartridge does not contain this material, please just ensure you are inserting the cartridge into the correct slot and hear it click into place.
La cartouche et l’imprimante utilisées dans cette vidéo peuvent ne pas sembler identiques aux vôtres, mais les mêmes procédures utilisées dans cette vidéo peuvent être utilisées pour la cartouche pour laquell vous avez choisi de résoudre les problèmes.
If your printer gives you an error message stating that the cartridge cannot be detected or has blinking lights, there may be a simple solution to fix this.
  • Confirm that the cartridge pictured matches the cartridge you have in your hand or installed in your machine.
  • Confirm that the printer you are using is listed in the printer compatibility table as a suitable printer for the cartridge you are trying to install.
  • If ONE of these TWO criteria do NOT match, you have most likely received the incorrect cartridge for your printer. Please visit our PRINTER COMPATIBILITY page in order to determine what cartridge you need for your machine.

Once you have confirmed you have the correct cartridge for your printer, follow any on-screen prompts and open the cover on the printer.

Remove the cartridge and close the cover.

Locate the chip on the top of the cartridge. If the chip is missing or not in the proper location, you will need to return the cartridge to the place of purchase.

Once you have confirmed that the chip is in the proper location, you may need to clean it from any type of obstruction or debris as this may be the cause of the error.

To clean the chip, you may use a pencil eraser.
  • Gently brush the chip with the eraser to remove any potential obstruction or debris. 
  • Or you may use any type of lint free cloth such as a coffee filter. Gently wipe the chip with the cloth, again removing any type of obstruction or debris. 

Replace the cartridge in the cradle, close the lid and again follow any on-screen prompts that may appear.

If the problem persists after returning the cartridge to its cradle, you should reset your printer.
  • This can be done by turning off your computer and your printer with the cartridges installed. 
  • Unplug your printer and leave your machines off for 2 minutes. 
  • Restart the printer and your computer, and attempt your print again. 

If the cartridge is still not being recognized after you have completed the above steps, make sure you are installing the cartridge into the correct location in your printer.
  • Please consult your printer's user manual for information on how to correctly install your remanufactured cartridge.

If the error persists after attempting all troubleshooting steps, you will need to return your cartridge to the place of purchase.
La cartouche et l’imprimante utilisées dans cette vidéo peuvent ne pas sembler identiques aux vôtres, mais les mêmes procédures utilisées dans cette vidéo peuvent être utilisées pour la cartouche pour laquell vous avez choisi de résoudre les problèmes.
If you have printed a document and are unsatisfied with the print quality, please ensure that there are no low or empty ink warnings on your printer or computer screen.

If a warning is present, you will need to replace your inkjet cartridge.

If no warning is displayed, you may need to run a cleaning cycle in order to improve the quality of your print.

To perform a cleaning cycle using your printer's touch screen, please do the following:

(If your printer does not have a touch screen, please consult your printer's user manual for instructions on how to perform a cleaning cycle.)
  • On the printer’s touch screen, press the “ink”icon. 
  • Scroll down and select the "Cleaning" icon. 
  • Scroll down and select “all”. You may also choose black or color depending on which cartridge is not printing well. 
  • You will observe your printer performing a cleaning cycle. Please note that the cycle may take several minutes to complete. 

Once the cleaning cycle is finished, your printer will display "completed".

Next run a print quality check to see if the print quality has improved.
  • To do so, press the "ink" icon 
  • Next press "Test Print", and then press "Print Quality" 
  • Select "Start" 

You will observe your printer printing a test page.

If the print on your test page is satisfactory, select "Yes". You may return to the document you wish to print and resume printing.

If the print on your test page is unsatisfactory, you may select "No" to run another cleaning cycle.
  • Please be aware that cleaning your printhead does consume ink; and therefore, should only be completed when necessary. 

If your test page is unsatisfactory after performing the cleaning cycles, you may need to replace your inkjet cartridge.
La cartouche et l’imprimante utilisées dans cette vidéo peuvent ne pas sembler identiques aux vôtres, mais les mêmes procédures utilisées dans cette vidéo peuvent être utilisées pour la cartouche pour laquell vous avez choisi de résoudre les problèmes.
If you receive an error message stating that the “alignment failed” or that the ”alignment could not be completed”, this may indicate that the printer is not properly recognizing the cartridge.

Remove the cartridge from your printer, and locate the chip on the top of the cartridge. Ensure that the chip is intact; and if so, you will want to clean the chip from any obstruction or debris as this may be preventing the alignment from completing.

Using a lint free cloth (such as a coffee filter), gently wipe the chip to remove any obstruction or debris.

Slowly reinstall the cartridge and attempt the alignment process again.

If the error continues, it may be necessary to perform a cleaning cycle to improve the quality of the print and allow the alignment process to be completed. Every printer is different so please consult your printer’s user manual for instructions on performing a cleaning cycle on your printer.

If you are not able to perform a cleaning cycle or if the alignment fails even after performing a cleaning cycle, please ensure that the scanner glass is clean and free from fingerprints or debris (this applies to certain models only).

If these steps do not allow the printer to align the cartridge(s), you will need to return the cartridge(s) to the place of purchase.
La cartouche et l’imprimante utilisées dans cette vidéo peuvent ne pas sembler identiques aux vôtres, mais les mêmes procédures utilisées dans cette vidéo peuvent être utilisées pour la cartouche pour laquell vous avez choisi de résoudre les problèmes.
If your printer gives you an error message stating that the cartridge cannot be detected or has blinking lights, there may be a simple solution to fix this.
  • Confirm that the cartridge pictured matches the cartridge you have in your hand or installed in your machine.
  • Confirm that the printer you are using is listed in the printer compatibility table as a suitable printer for the cartridge you are trying to install.
  • If ONE of these TWO criteria do NOT match, you have most likely received the incorrect cartridge for your printer. Please visit our PRINTER COMPATIBILITY page in order to determine what cartridge you need for your machine.

Once you have confirmed you have the correct cartridge for your printer, follow any on-screen prompts and open the cover on the printer.

Remove the cartridge and close the cover.

Locate the chip on the top of the cartridge. If the chip is missing or not in the proper location, you will need to return the cartridge to the place of purchase.

Once you have confirmed that the chip is in the proper location, you may need to clean it from any type of obstruction or debris as this may be the cause of the error.

To clean the chip, you may use a pencil eraser.
  • Gently brush the chip with the eraser to remove any potential obstruction or debris. 
  • Or you may use any type of lint free cloth such as a coffee filter. Gently wipe the chip with the cloth, again removing any type of obstruction or debris. 
Replace the cartridge in the cradle, close the lid and again follow any on-screen prompts that may appear.

If the problem persists after returning the cartridge to its cradle, you should reset your printer.
  • This can be done by turning off your computer and your printer with the cartridges installed. 
  • Unplug your printer and leave your machines off for 2 minutes. 
  • Restart the printer and your computer, and attempt your print again. 

If the cartridge is still not being recognized after you have completed the above steps, make sure you are installing the cartridge into the correct location in your printer.
  • Please consult your printer's user manual for information on how to correctly install your remanufactured cartridge.

If the error persists after attempting all troubleshooting steps, you will need to return your cartridge to the place of purchase.
La cartouche et l’imprimante utilisées dans cette vidéo peuvent ne pas sembler identiques aux vôtres, mais les mêmes procédures utilisées dans cette vidéo peuvent être utilisées pour la cartouche pour laquell vous avez choisi de résoudre les problèmes.
If you have just installed a remanufactured cartridge and the ink levels display as low or empty, there may be a solution for this problem.

Remove the cartridge or cartridges displaying a low ink level from your printer. Locate the chip on the top of the cartridge.

You may need to clean the chip from any obstruction or debris.

To do so, you may use a pencil eraser. Gently brush the chip with the eraser to remove any potential obstruction or debris.

Or you may use any type of lint free cloth such as a coffee filter. Gently wipe the chip with the cloth, again removing any type of obstruction or debris.

Once this is complete, replace the cartridge in the cradle and follow any on-screen prompts.

If a low or empty ink level still shows, remove the cartridge from your printer and close the cover, turn the machine off and disconnect the power supply for 2 minutes.

When 2 minutes have passed, turn your printer back on and reinstall the cartridge when prompted.

If the error persists, you should return your cartridge to the place of purchase.
In the event your cartridge does not appear to fit into the machine, please look at the print port on the cartridge. Some inkjets may have a protective covering that will need to be punctured upon insertion into your printer, as indicated in the image below.



The puncturing of this material will allow for the cartridge to be seated into the space properly. If your cartridge does not contain this material, please just ensure you are inserting the cartridge into the correct slot and hear it click into place.
La cartouche et l’imprimante utilisées dans cette vidéo peuvent ne pas sembler identiques aux vôtres, mais les mêmes procédures utilisées dans cette vidéo peuvent être utilisées pour la cartouche pour laquell vous avez choisi de résoudre les problèmes.
If your printer gives you an error message stating that the cartridge cannot be detected or has blinking lights, there may be a simple solution to fix this.
  • Confirm that the cartridge pictured matches the cartridge you have in your hand or installed in your machine.
  • Confirm that the printer you are using is listed in the printer compatibility table as a suitable printer for the cartridge you are trying to install.
  • If ONE of these TWO criteria do NOT match, you have most likely received the incorrect cartridge for your printer. Please visit our PRINTER COMPATIBILITY page in order to determine what cartridge you need for your machine.

Once you have confirmed you have the correct cartridge for your printer, follow any on-screen prompts and open the cover on the printer.

Remove the cartridge and close the cover.

Locate the chip on the top of the cartridge. If the chip is missing or not in the proper location, you will need to return the cartridge to the place of purchase.

Once you have confirmed that the chip is in the proper location, you may need to clean it from any type of obstruction or debris as this may be the cause of the error.

To clean the chip, you may use a pencil eraser.
  • Gently brush the chip with the eraser to remove any potential obstruction or debris. 
  • Or you may use any type of lint free cloth such as a coffee filter. Gently wipe the chip with the cloth, again removing any type of obstruction or debris. 

Replace the cartridge in the cradle, close the lid and again follow any on-screen prompts that may appear.

If the problem persists after returning the cartridge to its cradle, you should reset your printer.
  • This can be done by turning off your computer and your printer with the cartridges installed. 
  • Unplug your printer and leave your machines off for 2 minutes. 
  • Restart the printer and your computer, and attempt your print again. 

If the cartridge is still not being recognized after you have completed the above steps, make sure you are installing the cartridge into the correct location in your printer.
  • Please consult your printer's user manual for information on how to correctly install your remanufactured cartridge.

If the error persists after attempting all troubleshooting steps, you will need to return your cartridge to the place of purchase.
La cartouche et l’imprimante utilisées dans cette vidéo peuvent ne pas sembler identiques aux vôtres, mais les mêmes procédures utilisées dans cette vidéo peuvent être utilisées pour la cartouche pour laquell vous avez choisi de résoudre les problèmes.
If you have printed a document and are unsatisfied with the print quality, please ensure that there are no low or empty ink warnings on your printer or computer screen.

If a warning is present, you will need to replace your inkjet cartridge.

If no warning is displayed, you may need to run a cleaning cycle in order to improve the quality of your print.

To perform a cleaning cycle using your printer's touch screen, please do the following:

(If your printer does not have a touch screen, please consult your printer's user manual for instructions on how to perform a cleaning cycle.)
  • On the printer’s touch screen, press the “ink”icon. 
  • Scroll down and select the "Cleaning" icon. 
  • Scroll down and select “all”. You may also choose black or color depending on which cartridge is not printing well. 
  • You will observe your printer performing a cleaning cycle. Please note that the cycle may take several minutes to complete. 

Once the cleaning cycle is finished, your printer will display "completed".

Next run a print quality check to see if the print quality has improved.
  • To do so, press the "ink" icon 
  • Next press "Test Print", and then press "Print Quality" 
  • Select "Start" 

You will observe your printer printing a test page.

If the print on your test page is satisfactory, select "Yes". You may return to the document you wish to print and resume printing.

If the print on your test page is unsatisfactory, you may select "No" to run another cleaning cycle.
  • Please be aware that cleaning your printhead does consume ink; and therefore, should only be completed when necessary. 

If your test page is unsatisfactory after performing the cleaning cycles, you may need to replace your inkjet cartridge.

* Rendement de page basé sur des impressions avec une couverture de page de 5 %.

Contenu recyclé certifié
Close
Recycled Content Certified

GreenCircle est un écolabel indépendant et tiers qui reconnaît l'engagement d'une organisation à réutiliser les matériaux pour soutenir une économie circulaire et réduire sa dépendance aux matières vierges. Les cartouches de toner remanufacturées de Clover Imaging Group sont certifiées GreenCircle pour contenir 86 % de contenu recyclé et les cartouches d'encre sont certifiées à 99 %..

Toner à faible émission
Close
Low-Emissions Toner

Les toners à faible émission utilisés par Clover Imaging Group ont été pré-approuvés par Nordic Ecolabelling pour une utilisation dans les cartouches de toner remanufacturées certifiées Nordic Swan Ecolabel. Ces toners sont spécialement formulés pour garantir que les exigences applicables du Nordic Swan Ecolabel sont respectées, y compris des critères fixant des limites strictes aux émissions de composés organiques volatils et interdisant la présence de certains polluants et autres substances nocives..

Close

Sign Up For More Information

- SIGN UP TODAY! -
Close

Thanks For Signing Up!

Register now to start saving 40% over OEM pricing

2022 Aspire Sustainability Comparative LCA, commissioned by Clover Imaging Group.

Information
Close
Information
Fermer
Information
Close
 
Close

 
Close

INFORMATION
Close

Êtes-vous certains de vouloir procéder à la déconnexion?

INFORMATION
Fermer

Appuyez sur OK pour passer à la région Clover Imaging Group

Choix multiples
Close

Cet article est disponible pour vente inconditionnelle ou échange d'achat.
Veuillez faire un choix ci-dessous.

Récupérer les données de compte
Close
Pour récupérer vos données de connexion, veuillez entrer votre courriel:
 
Veuillez patienter...
Loader
Information

Nous vous remercions pour l'intérêt que vous portez à CIG! En raison de la fonctionnalité robuste sur notre site, nous ne pouvons que soutenir les navigateurs Web les plus courants. Nous vous recommandons de mettre à niveau votre navigateur à la dernière version de Internet Explorer, Google Chrome ou Mozilla Firefox.

Information

Votre session prendra fin dans5minute(s).


Information

Votre session est expirée. Vous êtes maintenant déconnecté.


Erreur information introuvable
Close
Merci
Close
Vidéo
Close
Vidéo
Close
Vidéo
Close
Vidéo
Close
Vidéo
Close
Tutoriels en ligne
Close
Téléverser logo
Close

Formats autorisés : .jpg, .png, .bmp; Max:1024x768px; Min:590x307px.

Renseignements d'expédition ()

Close
INFORMATION
Close

La création de votre document est en cours. Veuillez attendre le téléchargement.


Modalités et conditions
Close
Liste d'adresses de livraison Voir toutes les adresses
Close
Cliquer sur l'adresse pour la sélectionner
Ajouter une nouvelle Expédier-à adresse
Close
* Champ obligatoire
Comment ça marche?
Close

Cliquer sur le bouton vert "Créer nouvel utilisateur"

Remplissez les champs du formulaire pour votre nouvel utilisateur. Sélectionnez les autorisations de votre nouvel utilisateur et attribuer-lui un nom d'utilisateur et mot de passe. Cliquez sur Enregistrer. Vous recevrez un courriel confirmant que le nouvel utilisateur a été créé avec succès. Suivez ces instructions pour configurer chaque nouvel utilisateur.

Après avoir créé un nouvel utilisateur, le nouvel utilisateur recevra un courriel automatisé avec son nouveau nom d'utilisateur et mot de passe. Il recevra des instructions sur la façon de changer un mot de passe s'il souhaite changer ce mot de passe éventuellement. Cependant, en tant qu'administrateur, vous pourrez toujours supprimer/modifier les utilisateurs, voir leurs renseignements de profil (y compris leur mot de passe ) et modifier leurs autorisations.

Si vous devez modifier un utilisateur, il existe des liens à côté de chaque utilisateur pour modifier ou supprimer le profil de l'utilisateur.

Si vous supprimez un utilisateur, l'utilisateur apparaîtra désormais sur la Page des utilisateurs supprimés, mais vous pouvez réactiver à tout moment si vous avez besoin de le faire.

Vidéo CIG
Close
Information
Close

Télécharger termes et conditions
Close

Formats autorisés : .jpg, .png, .bmp; Max:1024x768px; Min:590x307px.

Téléverser logo du client
Close

Formats autorisés : .jpg, .png, .bmp; Max:1024x768px; Min:590x307px.

Warning 
Close

Please note that this is a bid item that's part of the Silver Bullet program. Make sure that you have been approved to ship Silver Bullet items to this customer prior to placing an order. If this customer has not been approved, the order will be cancelled. Thank you.

Warning 
Close

Please note that at least one of selected items is a bid item that's part of the Silver Bullet program. Make sure that you have been approved to ship Silver Bullet items to this customer prior to placing an order. If this customer has not been approved, the order will be cancelled. Thank you.

Formation
Close
Courriel
Close
Pour télécharger ce certificat, veuillez saisir votre adresse courriel. Vous recevrez le fichier demandé dans les 10 prochaines minutes.
 
La collecte et l'utilisation de l'adresse courriel est régie par notre Politique de confidentialité